Hospital Furniture

Product Details:

Technical Description:

• Four Sections Bed. Four smooth electric actuators with Handheld & on one head side railing remote control to obtain: Head Raise, Knee Fold Raise, Trendelenburg, Reverse-Trendelenburg, Height Adjustment. 
• The Foot end elevates on Hinged Ratchet Mechanism. Precise CR, ERW tubular rectangular steel frame work. Trolley type base on four 12.5 cms swivel castors (two with brakes). Provided with Detachable Head & Foot Panels and Split side railings.
• Panels and Railings: Detachable and Easy to clean.
• Pretreated & Electrostatic - Antibacterial Powder Coated Surface.
• Provided with a Telescopic I.V. Pole with Four Locations on the Bed,
• Four Corner Rotating Anti-crash Buffers & O2 Cylinder Holder.
• Supplied in Knock Down Condition.

Product Details:

Obstetric and Gynecological Bed (52-1100-UZ) Description:

• Specially designed for Gynaecological procedures. 
• Strong Steel Frame, made of 1.5 mm thick MS CR ERW Grade, with Tube Ends closed with PE Caps. 
• Tubular accessories & rods made of 18/8 Stainless Steel. 
• Detergent and Disinfectant, Pre-treated and Coated with Polymer Epoxy Paint. Many parts of Stainless Steel. 
• Height adjustment through hydraulic foot operated pump and other movements are mechanical. 
• Provided with Mattress in three sections. 
• Provided with headrest at Backrest section. 
• Provided with a pair of strong, moulded lithotomy pads (with straps), mounted on S.S. Stand with screw clamps in two sides. 
• Provided with Lithotomy Poles with screw clamps. 
• Leg section in 2 parts with Screw Jointing. 
• Provided with Arm support for purpose of intravenous infusion, fixed with back section through a clip and moveable in various angles. 
• MS Tubular CRC ERW, SS 18/8. 
• Dense, washable foam, resistant to disinfectants. 
• Moveable/Adjustable arm support. 
• Recess-able leg section with S.S. waste receptacle underneath, connected with a drain pipe. 

Additional Information:

• Item Code: 52-1100-UZ

Product Details:

• Four sections moulded top bed.
• Four smooth crank mechanisms to obtain: Head Raise, Knee Fold Raise, Trendelenburg, Reverse-Trendelenburg, Height Adjustment.
• Precise, CR ERW rectangular tube (60x30 mm) steel frame work. 
• Trolley type base on four 12.5 cms swivel castors (two with brakes). 
• Provided with: (a) Detachable Head & Foot Moulded Panels, (b) Split Side Moulded Railings assisted with gas spring for a jerkless movement. 
• Pretreated & Electrostatic Powder Coated.
• Four locations for drip rod.
• Supplied in Knock Down Condition.

Additional Information:

• Delivery Time: Ex-Stock

Product Details:

Description:

• For accommodation of patients in treatment facilities.
• Four Sections uniformly perforated M.S Sheet Top, Pre-treated and Coated with Polymer Epoxy Paint & buffers at corners.
• The base is made of steel of 1.5 mm thick MS CR ERW Grade.
• Two smooth crank mechanisms at foot end panel to obtain Head Raise and Knee Fold Raise.
• Detachable head & foot string moulded panels.
• Aluminium Side collapsible Railings, 1 pair
• Provided with a lifting pole.
• Mounted on four 125 mm dia. Swivel Castors, two with brakes.

 

Specification:

• Patient trolley, made of tubular mild steel structure.
• Advanced foot operated Hydraulic Pump with dual pump to achieve Height Adjustment and Trendelenburg and Reverse Positions.
• The stretcher is made of imported PE materials.
• Mobile on four 5” castors with Central Locking and Steering Lock for Direction locking.
• Provided with Moulded Side Safety Rails, IV Pole
• Dimensions Approx:¿¿¿ 190 (L) x 68 (W) x 58 to 82.5 cms

Product Details:

Light weight, stretcher folding, made of strong aluminium poles. The stretcher is foldable widthwise with the help of lockable stainless steel cross bars. The stretcher is also foldable halfway lengthwise on Stainless Steel hinges. The stretcher is fitted with four Stainless Steel machine bent stumps. Material used is Corrosion resistant. Fitted with strong, washable, P.V.C. coated nylon fabric (orange or green colour), provided with Two Fastening belts, Utility Pocket to store the optional carry bag, patient record, cushion etc.

Optional:

• Zippered carry bag made of washable Nylon/Synthetic fabric with double shoulder slings.

 

Product Features:

• Lightweight, stretcher folding made of strong aluminium poles.
• The stretcher is foldable widthwise with the help of lockable stainless steel cross bars.
• The stretcher is also foldable halfway lengthwise on Stainless Steel hinges.
• The stretcher is fitted with four Stainless Steel machine bent stumps. Material used is Corrosion resistant.
• Fitted with strong, washable, P.V.C. coated nylon fabric (orange or green color), provided with Two Fastening belts, Utility Pocket to store the optional carry bag, patient record, cushion etc.
• Optional:- Zippered carry bag made of washable Nylon/Synthetic fabric with double shoulder slings.

Dimensions :

• Overall Open Size: 200(L) x 55(W) x 18(H) cms.
• Stretcher Surface: 180(L) x 55(W) cms.
• Folded Length: 100 cms

 

Additional Information:

• Item Code: 83-2100-D

Product Details:

SS tubular structure on four 10 cms. dia. Swivel castors. Two SS Shelves with SS railes on three sides, SS bowl and bucket.

Product Feature:

• SS tubular structure on four 10 cms dia swivel castors.
• Two SS Shelves with three side SS rails.
• SS bowl and Bucket
• Shelf Size: 55(L) x 46(W) cms.
• Overall Size: 106(L) x 46(W) x86 (H)cms.
• Supplied in Knock Down Condition.

 

Product Details:

SS tubular structure on four 10 cms dia swivel castors. Two SS Shelves with three side SS rails.

Product Features:

• SS tubular structure on four 10 cms dia swivel castors.
• Two SS Shelves with three side SS rails.
• Shelf Size: 55(L) x 46(W) cms.
• Supplied in Knock Down Condition.

Dimensions:

• Overall Size: 60(L) x 46(W) x 86(H) cms.

Product Details:

Seamless welded frame made of 304 grade stainless steel for strength & ease of cleaning. Fixed shelves with three sides up & one down.

Additional Information:

• Item Code: 50-5200-DS

Product Details:

Machine Pressed, CR MS Cupboard and a drawer with wooden lamiated front panels. Fixed legs on two 5cm twin swivel castors and two stumps. Die Pressed, Seamless, Stainless Steel top with seamless raised edges on three sides. 

Product Details:

Four smooth electric actuators with Handheld remote to obtain: Head Raise, Knee Fold Raise, Trendelenburg, Reverse-Trendelenburg, Height Adjustment. Precise CR, ERW tubular rectangular steel frame work. Trolley type base on four 12.5 cms swivel castors (two with brakes). Provided with Detachable Head & Foot Moulded Panels, Split Side Moulded Railings assisted with gas spring for a jerkless movement.

Additional Information:

• Item Code: 50-0500DHM

Product Details:

Four sections moulded top bed. Four smooth crank mechanisms at foot end to obtain: Head Raise, Knee Fold Raise, Trendelenburg, Reverse Trendelenburg and Height Adjustment. Precise CR, ERW tubular rectangular steel frame work. Trolley type base on four 12.5cms swivel castors (two with brakes). Provided with Detachable Head & Foot Moulded Panels, Split Side Moulded Railings assisted with gas spring for a jerkless movement.

Additional Information:

• Item Code: 50-0500-DH

Product Details:

Four sections Uniformly perforated, CR M.S. sheet top bed. Two smooth crank mechanisms at foot end panel to obtain Head Raise and Knee Fold Raise. Precise CR, ERW tubular rectangular steel frame work. Strong ‘H’ shaped legs on four 12.5 cms swivel castors (two with brakes). Provided with Detachable Head & Foot Moulded Panels, Aluminium Side Collapsible Railings.

Additional Information:

• Item Code: 50-0200D

Product Details:

Spine board is commonly used for safely transporting seriously injured and immobile patients. It can go directly into X-ray room and also float on water. Made of high strength engineering plastic make the spine board durable, strong for high weight bearing capacity & easy for storage.

Product Feature:

• Spine board is commonly used for safely transporting seriously injured and immobile patients.
• It can go directly into X-ray room and also float on water.
• Made of high strength engineering plastic make the spine board durable, strong for high weight bearing capacity & easy for storage.

 

 

Dimensions:

• Overall Size: 183(L) x 45(W) x 5(H) cms.

Additional Information:

• Item Code: 83-2700

Product Details:

Laminated top fitted on aluminium profile column with strong base frame on four swivel castors. Height adjustable with smooth gas spring mechanism through side lever. Supplied in Knock Down Condition.

Product Features:

• Laminated top fitted on aluminum profile column with strong base frame on four swivel castors.
• Height adjustable with smooth gas spring mechanism through side lever.
• Pretreated and electrostatic powder coated.
• Supplied in Knock Down Condition.

Dimensions:

• Table Top Size: 80(L) x 41(W) cms.
• Height Adjustable: 76 to 105 cms.

 

Product Details:

ABS Body Bed Side Table with Cupboard and Drawer with ABS Top. Provided with one open shelf at the bottom of the table for storing Bed Pan, Shoes etc. 

Product Details:

ABS Body Bed Side Table with Cupboard and Drawer with ABS Top. With laminated front panel.

Product Features:

• PP Body Bed Side Table with Cupboard and Drawer with ABS Top.
• Front panel is with PP sticker by wooden color.
• Mounted on four 5cms dia twin swivel castors.
• Overall Approx Size: 50(W) x 58(D) x 75(H) cms.

 

Product Details:

Laminated top fitted on aluminium profile column with strong base frame on four swivel castors. Height adjustable with smooth gas spring mechanism through side lever. Supplied in Knock Down Condition.

Product Features:

• Laminated top fitted on mild steel tubular frame work on four swivel castors.
• Height adjustable with smooth gear mechanism through side rotating handle.
• Pretreated and electrostatic powder coated.
• Supplied in Knock Down Condition.

Dimensions:

• Table Top Size: 80(L) x 40(W) cms.
• Height Adjustable: 76 to 105 cms.

Product Details:

Machine Pressed, CR MS Cupboard and a drawer with ventilating louvers on press lock door. Fixed legs on two 5cm twin swivel castors and two stumps. Die Pressed, Seamless, Stainless Steel top with seamless raised edges on three sides. 

Product Details:

A unique design to save space in the Paient’s Room. Fixed on Ruber Stumps in Chair position, with PU Arm Supports. Retractable on castors, the chair upon opening becomes a stable Attendent Bed.

Product Feature:

• A unique design to save space in the Patient''s Room.
• Fixed on Rubber Stumps in Chair position, with PU Arm Supports. Retractable on castors, the chair upon opening becomes a stable Attendant Bed.
• Pretreated and electrostatic powder coated.

Dimensions:

• Overall Size: 183(L) x 51(W) x 46(H) cms

Additional Information:

• Item Code: 50-0600D

Product Details:

Product Feature:

• 7 Functions Bed
• 4 Sections Moulded Top
• Split Side Safety Rails with Controllers
• IV Pole (1 No.)
• Bed Extension
• Attendant Control Panel

Specification:

• Back Raise: 0-80 deg
• Knee Raise: 0-35 Deg
• Height: 50- 75 cm
• Trendelenburg: 0-12 Deg
• Rev. Trendelenburg: 0-12 Deg
• Overall Dimensions: 215(L) x 110 (W) cms
• Frame Size: 210(L) x 94 (W) cms
• Suitable Mattress: 200(L) x 90(W) cms

Product Details:

Concave surface cradles patient, provides support, and minimizes lateral movement. Completely built with lightweight aluminium adjustable in length, folds in half for storage, separates for application and removal. Comes with 2 restraint straps with quick-release metallic buckle.

Product Feature:

• Concave surface cradles patient, provides support, and minimizes lateral movement.
• Completely built with lightweight aluminium adjustable in length, folds in half for storage, separates for application and removal. Comes with 2 restraint straps with quick-release metallic buckle.

Dimensions:

• Overall Size: 170(L) x 43(W) x 8(H) cms.

 

 

Additional Information:

• Item Code: 83-2500

Product Details:

50-0200 Two Positions Bed (2 Cranks)

Product Details:

Two sections, Uniformly perforated, CR M.S. sheet top. One smooth crank mechanism at foot end panel to obtain Head Raise. Tubular Head and Foot Panels mobile on 10 cms Castors (Two with brakes). Provided with Drop Down, tubular type side safety rails.

specification:

• Back Raise:0-70
• Height: 60 cm
• Overall Dimensions: 140-75 cm

Product Features:

• Two sections, uniformly perforated, CR M.S. sheet top.
• One smooth crank mechanism at foot end panel to obtain Head Raise. Tubular Head and Foot Panels mobile on 10 cms Castors (Two with brakes).
• Provided with Drop Down, tubular type side safety rails.
• Pretreated and electrostatic powder coated.
• Supplied in Knock Down Condition.

Additional Information:

• Item Code: 50-1200-D